Product selection accessories laboratory technology

For refilling single use resins

For the manual filling of single use resins.

For two full or partial demineralisation cartridges.

Twin-tank water softener for the continuous removal of soft water up to 40 °dH

For the quick change to a full/partial demineralisation cartridge.

For optimum water preparation.

For optimum water preparation.

Height adjustable, for the optimum loading of inserts.

For the simple and convenient changing of demineralisation cartridges.

Cover for top of machine incl. side unit, 60 cm deep, 90 cm wide.

for the optimum loading of narrow necked glassware.

for optimum loading of up to 105 watch glasses.

For the sealing of fittings to load carriers.

for the optimum loading of different wash items.

for the optimum loading of narrow necked glassware 100 - 1,000 ml.

For fixing delicate wash items.

for holding different utensils.

for the optimum loading of 38 pipettes.

with plastic supports, Ø 3 mm, length 110 mm.

with plastic supports, Ø 4 mm, length 140 mm.

for the optimum loading of up to 98 pipettes.

with plastic supports, Ø 6 mm, length 200 mm.

with plastic supports, Ø 6 mm, length 220 mm.

For optimum securing of delicate items.

For the optimum loading of wide neck flasks, measuring cylinders, etc.

for the optimum loading of beakers up to 250 ml.

For the optimum loading of beakers from 600 to 1,000 ml.

for the optimum loading of half petri dishes.

for optimum loading of 210 slides.

with plastic supports, nozzle diameter 6 mm, length 210 mm, 1 item

with plastic supports, nozzle diameter 4 mm, length 90 mm, 1 item 

for optimum loading of 80 test tubes, 16 x 105 mm.

with plastic supports, nozzle diameter 4 mm, length 185 mm, 1 item

with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 1 item.

with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 10 items. 

with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 20 items.

with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 5 items.

for optimum loading of large-volume laboratory glassware, up to 20 l.

For the top cover on the cladding for appliances PG 8527 and PG 8528.

for the optimum loading of instruments on 3 levels.

for the optimum cleaning of instruments on 2 levels.

for the optimum loading of different inserts and mesh trays.

For the gentle cleaning of delicate items by interrupting the spray jet.

For the gentle cleaning of delicate items by interrupting the spray jet.

with 70 unoccupied injector slots for nozzles with Ø 2.5 mm.

equipped with 42 APLW 052 injector nozzles.

for the optimum loading of up to 38 pipettes.

for the optimum loading of modules on 1 - 4 levels.

with 24 unoccupied injector slots for nozzles.

for the optimum cleaning of instruments on 4 levels.

for the optimum loading of narrow necked glassware on 3 levels.

for the optimum loading of centrifuge tubes, phials and test tubes.

with plastic supports, nozzle diameter 4 mm, length 90 mm, 20 items

for the manual delivery of demineralised water.

For built-under versions.

For process chemicals and dispenser modules

For use with selected series G 78 upper baskets in PG 85 machines.

For the optimum cleaning of the wash items.

for the top cover on the machine, 70 cm deep, 90 cm wide.

to increase capacity by two further mesh trays.

for modules on 2 levels.

for the optimum loading of 8 solder frames.

for the optimum loading of narrow necked glassware 25 - 100 ml.

for the optimum loading of large volume laboratory glassware.

As cover for wash items in inserts.

with plastic supports, Ø 4 mm, length 160 mm.

for the optimum loading of beakers from 250 to 600 ml.

for the optimum loading of narrow necked glassware.

For optimum protection against contamination from labels or glass splinters.

for the optimum loading of narrow necked glassware.

with plastic supports, nozzle diameter 4 mm, length 185 mm, 20 items

for optimum loading of laboratory glassware – can be equipped with 32 nozzles.

for optimum loading of laboratory glassware – can be equipped with 18 nozzles.

for optimum loading of up to 56 pipettes.

For dispensing liquid neutral/alkaline media.

to raise the machine, 60 cm deep, 60 cm wide.

For the simple recording of bar codes for loading and user recognition.

with 110 unoccupied injector slots for nozzles with Ø 2.5 mm.

for the optimum cleaning of instruments on 3 levels.

with 42 unoccupied injector slots.

including drip tray and openings for connecting services to PG 8527/28.

with 20 unoccupied injector slots.

with 16 unoccupied injector slots.

with 121 + 24 unoccupied injector slots.

For the gentle cleaning of delicate items by interrupting the spray jet.

with 42 unoccupied injector slots for nozzles.

for optimum loading of up to 38 pipettes, connection for hot air drying.

equipped with 30 APLW 066 injector nozzles and 12 APLW 067 injector nozzles.

with 20 unoccupied injector slots for nozzles.

for the optimum loading of narrow necked glassware.

with plastic supports, nozzle diameter 6 mm, length 210 mm, 20 items

with plastic supports, nozzle diameter 4 mm, length 90 mm, 10 items

with plastic supports, nozzle diameter 4 mm, length 185 mm, 5 items

with plastic supports, nozzle diameter 4 mm, length 185 mm, 10 items

For two full or partial demineralisation cartridges.

Height adjustable, for the optimum loading of inserts.

For process chemicals and dispenser modules

for holding different utensils.

Height-adjustable for optimum positioning of laboratory glassware on the nozzle.

for the optimum loading of narrow necked glassware.

With level indicator for the automatic dispensing of liquid cleaning agents.

For dispensing liquid acid media.

For the optimum loading of pipettes/MIS instruments in injector units.

for the optimum loading of narrow necked glassware.

for the gentle holding of 5 microtiter plates.

for loading & unloading washer-&disinfectors.

for the optimum loading of narrow necked glassware 100 - 500 ml.

for the optimum loading of narrow necked glassware 500 - 1,000 ml.

for the optimum loading of up to 23 pipettes.

for optimum loading of centrifuge tubes, phials and test tubes, for example.

for the optimum loading of up to 12 large volume laboratory glassware.

For the optimum loading of injector modules or inserts.

with plastic supports, Ø 4 mm, length 180 mm.

with plastic supports, Ø 6 mm, length 240 mm.

for the optimum cleaning of the dispenser compartment.

with plastic supports, nozzle diameter 6 mm, length 130 mm, 1 item. 

for optimum loading of 56 half petri dishes.

for the optimum loading of narrow necked glassware.

with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 1 item.

for A 301/4 and A 301/5 injector modules.

with plastic supports, nozzle diameter 2.5 mm, length 80 mm, 5 items.

for optimum loading of laboratory glassware on upper levels.

for optimum loading of laboratory glassware on the lowest level.

for optimum loading of large-volume laboratory glassware, up to 50 l.

for optimum loading of laboratory glassware – can be equipped with 8 nozzles. 

for optimum loading of up to 121 pipettes.

for optimum loading of 2 pipette cartridges.

to raise the machine incl. side unit, 60 cm deep, 90 cm wide.

For optimum loading of 2 pipette cartridges.

for the optimum cleaning of instruments on 5 levels.

for loading & unloading washer-&disinfectors.

for loading & unloading washer-&disinfectors.

for the optimum loading of different inserts.

equipped with 32 APLW 051 injector nozzles and 10 APLW 055 injector nozzles

equipped with 20 APLW 055 injector nozzles

to raise the machine, 70 cm deep, 90 cm wide.

with 121 unoccupied injector slots.

For the gentle cleaning of delicate items by interrupting the spray jet.

with 121 unoccupied injector slots for nozzles with Ø 2.5 mm.

For the optimum loading of test tubes up to 12 x 105 mm.

For the optimum loading of test tubes up to 12 x 165 mm.

equipped with 121 APLW 047 injector nozzles.

with 110 unoccupied injector slots for nozzles with Ø 2.5 mm.

For the optimum loading of wide neck flasks, measuring cylinders, etc.

For the optimum loading of test tubes up to 12 x 200 mm.

equipped with 32 APLW 051 injector nozzles and 10 APLW 055 injector nozzles.

equipped with 12 APLW 056 injector nozzles and 12 APLW 052 injector nozzles.

for the optimum loading of narrow necked glassware 500 - 1,000 ml.

equipped with 20 APLW 056 injector nozzles.

for cleaning 88 centrifuge tubes, phials or test tubes, for example.

for the optimum loading of wide necked Erlenmeyer flasks.

For interruption-free connection to the printer.

For connection with a second or additional appliance.

For the regeneration of full demineralisation cartridges

For the optimum loading of inserts.

For holding standard DIN mesh trays as well as various inserts.

for the optimum loading of 4 DIN mesh trays.

Height-adjustable for optimum positioning of laboratory glassware on the nozzle.

For the top cover on the machine, 70 cm deep, 90 cm wide.

for the optimum loading of narrow necked glassware.

For dispensing liquid neutral/alkaline media.

for optimum loading of up to 44 watch glasses.

for the optimum loading of up to 116 pipettes.

for the optimum loading of up to 96 pipettes.

for process documentation, integrated

For use with selected series G 78 load carriers in PG 85 machines.

for use with selected series G 78 mobile units in PG 85 machines.

For the optimum loading of injector modules or inserts.

For fixing delicate wash items.

for the optimum loading of beakers up to 250 ml.

For fixing delicate wash items.

for the optimum loading of beakers 250 - 600 ml.

For fixing delicate wash items.

For the optimum loading of up to 98 vials.

with plastic supports, Ø 3 mm, length 90 mm.

for the optimum loading of laboratory glassware.

for optimum loading of centrifuge tubes, phials or test tubes, for example.

for butyrometers.

for the optimum loading of narrow necked glassware on 2 levels.

for optimum loading of 56 half petri dishes.

for optimum loading of laboratory glassware – can be equipped with 8 nozzles.

For the optimum loading of up to 18 beakers.

for A 300/2 and A 300/3 injector modules.

for the optimum loading of narrow necked glassware.

For the optimum cleaning of the wash items. Size 4 x 160 mm.

for A 302/2 and A 302/3 injector modules.

for optimum loading of large-volume laboratory glassware, 5 and 10 l.

with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 10 items.

with plastic supports, nozzle diameter 2.5 mm, length 125 mm, 20 items. 

for optimum loading of 3 pipette cartridges.

with 156 unoccupied injector slots for nozzles with Ø 2.5 mm.

with 84 unoccupied injector slots for nozzles with Ø 2.5 mm.

for cladding the steam condenser incl. service door, for PG 8527/28.

equipped with 42 APLW 051 injector nozzles

for automatic recognition of mobile unit/spray arm monitoring

for the optimum loading of different inserts.

to raise the side unit, 60 cm deep, 30 cm wide.

with 27 unoccupied injector slots.

equipped with 121 APLW 048 injector nozzles and 24 APLW 051 injector nozzles.

For the optimum loading of test tubes up to 12 x 75 mm.

equipped with 121 APLW 047 injector nozzles.

For the optimum loading of wide neck flasks, measuring cylinders, etc.

with 121 unoccupied injector slots for nozzles with Ø 2.5 mm.

with 56 unoccupied injector slots for nozzles with Ø 2.5 mm.

for the optimum loading of up to 104 pipettes.

for the optimum loading of up to 116 pipettes.

for the optimum loading of narrow necked glassware 100 - 500 ml.

with 16 unoccupied injector slots for nozzles.

with plastic supports, nozzle diameter 6 mm, length 130 mm, 5 items.

with plastic supports, nozzle diameter 6 mm, length 210 mm, 5 items 

with plastic supports, nozzle diameter 6 mm, length 210 mm, 10 items 

with plastic supports, nozzle diameter 4 mm, length 90 mm, 5 items